深圳安盛宇电子有限公司

The STM8S005C6/K6 value line 8-bit microcontrollers offer 32 Kbytes of Flash program memory, plus 128 bytes of data EEPROM. They are referred to as medium-density devices in the STM8S microcontroller family reference manual (RM0016). All devices of STM8S005C6/K6 value line provide the following benefits:performance, robustness, reduced system cost and short development cycles.
Device performance and robustness are ensured by true data EEPROM supporting up to 100000 write/erase cycles, advanced core and peripherals made in a state-of-the-art technology at 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system.
The system cost is reduced thanks to a high system integration level with internal clock oscillators, watchdog, and brown-out reset.
The common family product architecture with compatible pinout, memory map and modular peripherals allow application scalability and reduced development cycles.
All products operate from a 2.95 V to 5.5 V supply voltage.
Full documentation is offered as well as a wide choice of development tools.

All features
Core
Max fCPU: 16 MHz
Advanced STM8 core with Harvard architecture and 3-stage pipeline
Extended instruction set

Memories
Medium-density Flash/EEPROM
Program memory: 32 Kbytes of Flash memory; data retention 20 years at 55 °C after 100 cycles
Data memory: 128 bytes true data EEPROM; endurance up to 100 k write/erase cycles

RAM: 2 Kbytes

Clock, reset and supply management
2.95 V to 5.5 operating voltage
Flexible clock control, 4 master clock sources
Low-power crystal resonator oscillator
External clock input
Internal, user-trimmable 16 MHz RC
Internal low-power 128 kHz RC

Clock security system with clock monitor
Power management
Low-power modes (wait, active-halt, halt)
Switch-off peripheral clocks individually
Permanently active, low-consumption power-on and power-down reset

Interrupt management
Nested interrupt controller with 32 interrupts
Up to 37 external interrupts on 6 vectors

Timers
2x 16-bit general purpose timers, with 2+3 CAPCOM channels (IC, OC or PWM)
Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization
8-bit basic timer with 8-bit prescaler
Auto wakeup timer
Window and independent watchdog timers

Communications interfaces
UART with clock output for synchronous operation, SmartCard, IrDA, LIN
SPI interface up to 8 Mbit/s
I2C interface up to 400 Kbit/s

Analog to digital converter (ADC)
10-bit ADC, ± 1 LSB ADC with up to 10 multiplexed channels, scan mode and analog watchdog

I/Os
Up to 38 I/Os on a 48-pin package including 16 high-sink outputs
Highly robust I/O design, immune against current injection

Development support
Embedded single-wire interface module (SWIM) for fast on-chip programming and non-intrusive debugging