深圳安盛宇电子有限公司

The high density value line STM8L05xxx devices are members of the STM8L ultra low power 8-bit family. The value line STM8L05xxx ultra low power family features the enhanced STM8 CPU core providing increased processing power (up to 16 MIPS at 16 MHz) while maintaining the advantages of a CISC architecture with improved code density, a 24-bit linear addressing space and an optimized architecture for low power operations.
The family includes an integrated debug module with a hardware interface (SWIM) which allows non-intrusive In-application debugging and ultra-fast Flash programming.
High density value line STM8L05xxx microcontrollers feature embedded data EEPROM and low-power, low-voltage, single-supply program Flash memory.
All devices offer 12-bit ADC, real-time clock, four 16-bit timers, one 8-bit timer as well as standard communication interface such as two SPIs, I2C, three USARTs and 8x24 or 4x28-segment LCD. The 8x24 or 4x 28-segment LCD is available on the high density value line STM8L05xxx.
The STM8L05xxx family operates from 1.8 V to 3.6 V and is available in the -40 to +85 °C temperature range.
The modular design of the peripheral set allows the same peripherals to be found in different ST microcontroller families including 32-bit families. This makes any transition to a different family very easy, and simplified even more by the use of a common set of development tools.
All value line STM8L ultra low power products are based on the same architecture with the same memory mapping and a coherent pinout.

All features
Operating conditions
Operating power supply: 1.8 V to 3.6 V
Temperature range: -40 °C to 85 °C

Low power features
5 low power modes: Wait, Low power run (5.9 μA), Low power wait (3 μA), Active-halt with full RTC (1.4 μA), Halt (400 nA)
Dynamic power consumption: 200 μA/MHz + 330 μA
Ultra-low leakage per I/0: 50 nA
Fast wakeup from Halt: 4.7 μs

Advanced STM8 core
Harvard architecture and 3-stage pipeline
Max freq. 16 MHz, 16 CISC MIPS peak
Up to 40 external interrupt sources

Reset and supply management
Low power, ultra-safe BOR reset with 5 programmable thresholds
Ultra low power POR/PDR
Programmable voltage detector (PVD)

Clock management
32 kHz and 1 to 16 MHz crystal oscillators
Internal 16 MHz factory-trimmed RC
38 kHz low consumption RC
Clock security system

Low power RTC
BCD calendar with alarm interrupt
Digital calibration with +/- 0.5ppm accuracy
Advanced anti-tamper detection

LCD: 8x24 or 4x28 w/ step-up converter
Memories
64 KB Flash program memory and 256 bytes data EEPROM with ECC, RWW
Flexible write and read protection modes
4 KB of RAM

DMA
4 channels supporting ADC, SPIs, I2C, USARTs, timers
1 channel for memory-to-memory

12-bit ADC up to 1 Msps/27 channels
Internal reference voltage

Timers
Three 16-bit timers with 2 channels (used as IC, OC, PWM), quadrature encoder
One 16-bit advanced control timer with 3 channels, supporting motor control
One 8-bit timer with 7-bit prescaler
2 watchdogs: 1 Window, 1 Independent
Beeper timer with 1, 2 or 4 kHz frequencies

Communication interfaces
Two synchronous serial interfaces (SPI)
Fast I2C 400 kHz SMBus and PMBus
Three USARTs (ISO 7816 interface + IrDA)

Up to 54 I/Os, all mappable on interrupt vectors
Development support
Fast on-chip programming and non- intrusive debugging with SWIM
Bootloader using USART